Low-emission systems

emmisions

VIASOL ECO perm

The low-emission, vapour-permeable coating system for moisture-sensitive subsoils, magnesite and anhydrite screeds and fresh concrete.

SYSTEM STRUCTURE


Seal (contingency item)
VIASOL EP-S668

Top layer
with chips as an option
VIASOL EP-C568

Scratch coating (contingency item)
VIASOL EP-C568

Adhesive primer
VIASOL EP-P268

Substrate / concrete

System thickness approx. 2 - 4 mm


SYSTEM INFORMATION

Two to four-layer low emission aqueous EP coating system

all products tested according to AgBB
tested properties
suitable for driving access as per OS 8
resistant to DIBT test liquids 1, 3, 10, 11
diffusion-equivalent air layer thickness for water vapour diffusion: 43 m (class II)
diffusion-equivalent air layer thickness for CO2-diffusion: 82 m (>50 m is considered CO2-tight)

SYSTEM BENEFITS

low-emission
vapour diffusion-capable
self-levelling, jointless
hard-wearing, durable in the
context of moderate loads
good resistance to abrasion and chemicals
surfaces ranging from smooth to non-skid
hygienic, non-porous and liquid-tight
complies with EU food industry regulations
easy to clean
resistant to backward moisture penetration
available in a wide range of colours
also serves as a fine porous moisture barrier layer below steam-tight coatings

 

VIASOL ECO perm conductive

The low-emission, vapour-permeable and conductive coating system for moisture-sensitive subsoils, magnesite and compsition floors and fresh concrete

SYSTEM STRUCTURE


Top coat
conductive
VIASOL EP-C5468

Conductive layer
with copper band wall connection
VIASOL EP-E468

Scratch coating (contingency item)
VIASOL EP-C5468

Adhesive Primer
VIASOL EP-P268

Substrate / concrete

System thickness approx. 2 - 4 mm


SYSTEM INFORMATION

Two to four-layer aqueous low emission EP coating system

all product tested according to AgBB
tested properties
suitable for driving access as per OS 8
resistant to DIBT test liquids 1, 3, 10, 11
diffusion-equivalent air layer thickness for water vapour diffusion: 43 m (class II)
diffusion-equivalent air layer thickness for CO2-diffusion: 82 m (>50 m is considered CO2-tight)

SYSTEM BENEFITS

low-emission
vapour diffusion-capable
self-levelling, jointless
hard-wearing, durable in the
context of moderate loads
good resistance to abrasion and chemicals
surfaces ranging from smooth to non-skid
hygienic, non-porous and liquid-tight
complies with EU food industry regulations
easy to clean
resistant to backward moisture penetration
available in a wide range of colours
also serves as a fine porous moisture barrier layer below steam-tight coatings

VIASOL ECO protective aqua

The low-emission, water-based vapour-permeable solution for effective and lasting surface protection for industrial floors subject to minor load

SYSTEM STRUCTURE


Aqueous seal
VIASOL EP-S668

Aqueous preparation (contingency item)
VIASOL EP-S668

Adhesive primer
VIASOL EP-P268

Substrate / concrete

System thickness approx. 0.2 - 0.5 mm



SYSTEM INFORMATION

Single or dual-layerd low emission surface protection system - with aqueous seal

low-emission
all products tested according to AgBB
reliable
easy to retouch
high product and raw material quality
in-house quality control
rapid
small number of layers
short laying times
economical
minimal materials required
fully developed products

SYSTEM BENEFITS

low-emission
provides surface protection, improves resistance to abrasion
and makes cleaning easier
can be replaced repeatedly
hard-wearing, durable in the context of light mechanical loads
antidust, jointless
surfaces ranging from smooth to non-skid
liquid-tight
resistant to backward moisture penetration
available in a wide range of colours

MC Resin Flooring UK & Ireland